Set Your Scope With
A Red Dot Sight From Red-i-Laser
Would it not be grand if you
could set your rifle’s
scope or crosshairs with a red
dot sight that shines
a laser through the barrel
in the exact spot where the
live round would hit? You
can, with Red-i-Laser’s
innovate Red-i unit. Set
your sights easily, precisely
and noiselessly without having
to use live ammunition, saving
you time and money.
It is very easy to install
the Red-i red dot sight and
the instructions are repeated
on our website as well, for
your perusal. First
insert the Red-i unit into
the magazine or directly into
the chamber by hand. Close
the bolt without forcing it;
this will activate the unit
and it will emit a red laser
beam through the barrel. To
see the red dot clearly in
bright sunlight, aim for a
shaded or fluorescent target
that is about 25m away from
you. Carefully note the
position of the red laser dot
in relation to the crosshairs. If
the laser dot is in the exact
position as memorised, the
rifle is zeroed at that specific
shooting distance.
The Red-i unit is a high-precision
optical instrument and care
should be taken not to drop
it onto a hard surface. Its
internal laser is carefully
aligned with the dimensions
of its outer cartridge during
manufacture on our patented
Center Jig, so it should be
handled with care. After
use, always return it to the
provided belt pouch or the
original package case. If
you have zeroed the rifle with
Red-i, yet you find that the
grouping is still off-centre
when shooting with live ammunition,
it does not mean that your
Red-i unit is not working correctly. It
could be that you rifle’s
chamber is not perfectly aligned
with the barrel centre.
For more information on the
most convenient and precise red
dot sight in the world, contact Red-i-Laser
today.
|
