|
Red-i-Laser Makes Top Rifle Sighting Tools
After Red-i-Laser had invented their groundbreaking rifle sighting tools, thousands of riflemen have benefited from this innovative technology. Rifle sighting tools would never be the same; suddenly, riflemen could easily practise aiming, zero their rifles and set their scope crosshairs or sights with the utmost of precision.
Off the shelf, we offer our rifle sighting tool in calibres ranging from 223 Rem (5.56 Nato) to 700 Nitro. However, we are proud of our ability to manufacture any calibre if we are supplied with the appropriate S.A.A.M.I. or C.I.P. specifications. All our Red-i units conform to the accepted quality standards and regulatory requirements and are made of stainless steel and high-grade brass. Each unit is calibrated and aligned using our Center Jig.
Red-i can be used for indoor training with its unique Short Flash System (SFS), which is a firing pin-activated system. After the unit has been inserted into the chamber, closing the bolt will activated it and pulling the trigger will cause it to emit a laser flash lasting about twenty milliseconds. The laser hits the target in the same place the live round would. If you are going to use it as a bore sight, you would have to zero your rifle first using live ammunition. Then insert the unit in the chamber and close the bolt to activate it. Take aim at a target that is 25 metres (32 yards) away and carefully note the position of the laser in relation to the scope crosshairs – this relation will stay the same and you would not have to repeat the procedure.
It is time-consuming and expensive to always zero your rifle with live ammunition; that is why we had developed rifle sighting tools like Red-i-Laser for marksmen and riflemen who want an effective and efficient solution. For more information, contact us.
|
